Sound Blaster Live! cards do not suppoer Sound Blaster Pro emulation properly. All SBLive! cards should have abuilt in Sound Blaster 16 emulator... which means in UAKM and Pandora it should detect your card as a SoundBblaster 16. I myself has the same card and I found it ran fine with SB16 @ 220 - 7 - 1
If this still does not work for you, I will assumethe SB16 emulation is not installed/working properly. If this is the case you will need to un-install and re-instal the sound blaster live driver that came with your card or an update version from the Sound Blaster website.
Hope this helps!
-Cub. =o)
If this still does not work for you, I will assumethe SB16 emulation is not installed/working properly. If this is the case you will need to un-install and re-instal the sound blaster live driver that came with your card or an update version from the Sound Blaster website.
Hope this helps!
-Cub. =o)
Stuff below is from other posts on this subject that I have mentioned prior. For me I had to "Hack" an AWE32 in order to get 16bit stereo. You first need to add ",1" to the end of each sound board, this tells both UAKM and PD not to verify the sound card. The reason for this is so you can impute your own variables. Thus far what is imputed below works for me. I hope this helps
Best Regards and Luck
KvE
Ashkii
PS Perhaps for you it will work best if you imput as BoardNum=3 instead of BoardNum=4 which is AWE32
19th. Now actually go to your PANDORA folder and click on CONFIG.INI, use notepad to edit these settings and make these particular parameters set as so. Then save and close the file.
[DIGI_CONFIG]
BoardNum=4
IoAddr=0x220
DMA=5
Int=7
Volume=100
ReverseStereo=No
[MIDI_CONFIG]
BoardNum=2
IoAddr=0x388
DigiDrums=Yes
Volume=60
[CD_MAP]
Disk1=D
Disk2=E
Disk3=F
Disk4=G
Disk5=H
Disk6=I
20th. You can now play the game! Without disc swapping. Just start up D-fend and simply double click your PANDORA profile and it should start it up. ALT+ENTER to start in full screen mode, please note that you should wait until the opening video has finished and the PD menu has popped up. For me if I switch to full screen mode before the opening video is finished my sound is screwed-up and it runs slow.
I hope that answers your questions and if you have any other problems just ask
Best Regards
KvE
Aka
Ashkii
To fix the CD issue, it should be resolved by opening in the PD installation folder the CONFIG.INI and simply edit [CD MAP] to the proper drive locations and save.
Also if you plan to 'hack' a sound card and you have been encountering trouble in getting 16bit stereo, you need to open the SOUND.INF and place a 1 at the end of each line for the [DIGI_BOARD], this tells the program not to verify the sound card and it works, also for UAKM.
Best of luck, hope that solves the CD mapping issue.
PS edit that stuff in notepad.
Best Regards
KvE aka Ashkii
[DIGI_BOARDS]
1) Sound Blaster 1.0 = 0xe000,0,1,1
2) Sound Blaster Pro = 0xe001,1,2,1
3) Sound Blaster 16 = 0xe018,3,3,1
4) Sound Blaster AWE32 = 0xe018,3,5,1
5) Microsoft Sound System {Microsoft Sound Sys} = 0xe00e,3,6,1
6) Ensoniq Soundscape = 0xe020,3,7,1
7) Pro AudioSpectrum = 0xe005,1,8,1
Pro AudioSpectrum 16 {Pro AudioSpect 16} = 0xe006,3,9,1
9) Adlib Gold = 0xe008,3,11,1
10) ESS AudioDrive = 0xe01c,3,18,1
11) Gravis Ultrasound = 0xe025,2,19,1
12) Gravis Ultrasound Max = 0xe029,2,20,1
13) Roland RAP-10 = 0xe022,2,17,1
14) Sound Galaxy Nova16 = 0xe00e,3,21,1
15) SB 1.0 (No Verify) = 0xe000,0,1,1,1
16) SB Pro (No Verify) = 0xe001,1,2,1,1
Best Regards and Luck
KvE
Ashkii
PS Perhaps for you it will work best if you imput as BoardNum=3 instead of BoardNum=4 which is AWE32
19th. Now actually go to your PANDORA folder and click on CONFIG.INI, use notepad to edit these settings and make these particular parameters set as so. Then save and close the file.
[DIGI_CONFIG]
BoardNum=4
IoAddr=0x220
DMA=5
Int=7
Volume=100
ReverseStereo=No
[MIDI_CONFIG]
BoardNum=2
IoAddr=0x388
DigiDrums=Yes
Volume=60
[CD_MAP]
Disk1=D
Disk2=E
Disk3=F
Disk4=G
Disk5=H
Disk6=I
20th. You can now play the game! Without disc swapping. Just start up D-fend and simply double click your PANDORA profile and it should start it up. ALT+ENTER to start in full screen mode, please note that you should wait until the opening video has finished and the PD menu has popped up. For me if I switch to full screen mode before the opening video is finished my sound is screwed-up and it runs slow.
I hope that answers your questions and if you have any other problems just ask
Best Regards
KvE
Aka
Ashkii
To fix the CD issue, it should be resolved by opening in the PD installation folder the CONFIG.INI and simply edit [CD MAP] to the proper drive locations and save.
Also if you plan to 'hack' a sound card and you have been encountering trouble in getting 16bit stereo, you need to open the SOUND.INF and place a 1 at the end of each line for the [DIGI_BOARD], this tells the program not to verify the sound card and it works, also for UAKM.
Best of luck, hope that solves the CD mapping issue.
PS edit that stuff in notepad.
Best Regards
KvE aka Ashkii
[DIGI_BOARDS]
1) Sound Blaster 1.0 = 0xe000,0,1,1
2) Sound Blaster Pro = 0xe001,1,2,1
3) Sound Blaster 16 = 0xe018,3,3,1
4) Sound Blaster AWE32 = 0xe018,3,5,1
5) Microsoft Sound System {Microsoft Sound Sys} = 0xe00e,3,6,1
6) Ensoniq Soundscape = 0xe020,3,7,1
7) Pro AudioSpectrum = 0xe005,1,8,1
Pro AudioSpectrum 16 {Pro AudioSpect 16} = 0xe006,3,9,1
9) Adlib Gold = 0xe008,3,11,1
10) ESS AudioDrive = 0xe01c,3,18,1
11) Gravis Ultrasound = 0xe025,2,19,1
12) Gravis Ultrasound Max = 0xe029,2,20,1
13) Roland RAP-10 = 0xe022,2,17,1
14) Sound Galaxy Nova16 = 0xe00e,3,21,1
15) SB 1.0 (No Verify) = 0xe000,0,1,1,1
16) SB Pro (No Verify) = 0xe001,1,2,1,1
Politics is like a corral. No matter where you are you will always be shoveling it.
You were right! I added a ",1" to the end of each sound board and that fixed the problem. 
